-- Network Working Group T. Cox
-- Request for Comments: 1407 K. Tesink
-- Obsoletes: 1233 Bell Communications Research
-- Editors
-- January 1993
--
--
-- Definitions of Managed Objects
-- for the DS3/E3 Interface Type
--RFC1407-MIB DEFINITIONS::=BEGINIMPORTSGaugeFROM RFC1155-SMI
DisplayString, transmission
FROM RFC1213-MIB
OBJECT-TYPEFROM RFC-1212;-- This MIB module uses the extended OBJECT-TYPE macro-- as defined in RFC 1212.ds3 OBJECTIDENTIFIER::={ transmission 30}-- The DS3/E3 Near End Group-- Implementation of this group is mandatory for all-- systems that attach to a DS3/E3 Interface.-- The DS3/E3 Near End Group consists of four tables:-- DS3/E3 Configuration-- DS3/E3 Current-- DS3/E3 Interval-- DS3/E3 Total
-- the DS3/E3 Configurationdsx3ConfigTable OBJECT-TYPESYNTAXSEQUENCEOF Dsx3ConfigEntry
ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION"The DS3/E3 Configuration table."::={ ds3 5}dsx3ConfigEntry OBJECT-TYPESYNTAX Dsx3ConfigEntry
ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION"An entry in the DS3/E3 Configuration table."
INDEX{ dsx3LineIndex }::={ dsx3ConfigTable 1}
Dsx3ConfigEntry ::=SEQUENCE{
dsx3LineIndex
INTEGER,
dsx3IfIndex
INTEGER,
dsx3TimeElapsed
INTEGER,
dsx3ValidIntervals
INTEGER,
dsx3LineType
INTEGER,
dsx3LineCoding
INTEGER,
dsx3SendCode
INTEGER,
dsx3CircuitIdentifier
DisplayString,
dsx3LoopbackConfig
INTEGER,
dsx3LineStatus
INTEGER,
dsx3TransmitClockSource
INTEGER}dsx3LineIndex OBJECT-TYPESYNTAXINTEGER(1..65535)ACCESSread-onlySTATUSmandatoryDESCRIPTION"This object is the identifier of a DS3/E3
Interface on a managed device. If there is an
ifEntry that is directly associated with this
and only this DS3/E3 interface, it should have
the same value as ifIndex. Otherwise, number
the dsx3LineIndices with an unique identifier
following the rules of choosing a number that
is greater than ifNumber and numbering the
inside interfaces (e.g., equipment side) with
even numbers and outside interfaces (e.g,
network side) with odd numbers."::={ dsx3ConfigEntry 1}dsx3IfIndex OBJECT-TYPESYNTAXINTEGER(1..65535)ACCESSread-onlySTATUSmandatoryDESCRIPTION"This value for this object is equal to the
value of ifIndex from the Interfaces table of
MIB II (RFC 1213)."::={ dsx3ConfigEntry 2}dsx3TimeElapsed OBJECT-TYPESYNTAXINTEGER(0..899)ACCESSread-onlySTATUSmandatoryDESCRIPTION"The number of seconds that have elapsed since
the beginning of the near end current error-
measurement period."::={ dsx3ConfigEntry 3}dsx3ValidIntervals OBJECT-TYPESYNTAXINTEGER(0..96)
ACCESSread-onlySTATUSmandatoryDESCRIPTION"The number of previous near end intervals for
which valid data was collected. The value will be
96 unless the interface was brought online within
the last 24 hours, in which case the value will be
the number of complete 15 minute near end
intervals since the interface has been online."::={ dsx3ConfigEntry 4}dsx3LineType OBJECT-TYPESYNTAXINTEGER{dsx3other(1),
dsx3M23(2),dsx3SYNTRAN(3),dsx3CbitParity(4),dsx3ClearChannel(5),e3other(6),e3Framed(7),e3Plcp(8)}ACCESSread-writeSTATUSmandatoryDESCRIPTION"This variable indicates the variety of DS3 C-bit
or E3 application
implementing this interface. The type of
interface affects the interpretation of the
usage and error statistics.
The rate of DS3 is 44.736 Mbps and E3 is
34.368 Mbps.
The dsx3ClearChannel value means that the C-bits
are not used except for sending/receiving
AIS.
The values, in sequence, describe:
TITLE: SPECIFICATION:
dsx3M23 ANSI T1.107-1988
dsx3SYNTRAN ANSI T1.107-1988
dsx3CbitParity ANSI T1.107a-1989
dsx3ClearChannel ANSI T1.102-1987
e3Framed CCITT G.751
e3Plcp ETSI T/NA(91)18."::={ dsx3ConfigEntry 5}dsx3LineCoding OBJECT-TYPESYNTAXINTEGER{
dsx3Other(1),dsx3B3ZS(2),e3HDB3(3)}ACCESSread-writeSTATUSmandatoryDESCRIPTION"This variable describes the variety of Zero Code
Suppression used on this interface, which in turn
affects a number of its characteristics.
dsx3B3ZS and e3HDB3 refer to the use of specified
patterns of normal bits and bipolar violations
which are used to replace sequences of zero bits
of a specified length."::={ dsx3ConfigEntry 6}
dsx3SendCode OBJECT-TYPESYNTAXINTEGER{dsx3SendNoCode(1),dsx3SendLineCode(2),dsx3SendPayloadCode(3),dsx3SendResetCode(4),dsx3SendDS1LoopCode(5),dsx3SendTestPattern(6)}ACCESSread-write
STATUSmandatoryDESCRIPTION"This variable indicates what type of code is
being sent across the DS3/E3 interface by the
device. (These are optional for E3 interfaces.)
The values mean:
dsx3SendNoCode
sending looped or normal data
dsx3SendLineCode
sending a request for a line loopback
dsx3SendPayloadCode
sending a request for a payload loopback
(i.e., all DS1/E1s in a DS3/E3 frame)
dsx3SendResetCode
sending a loopback deactivation request
dsx3SendDS1LoopCode
requesting to loopback a particular DS1/E1
within a DS3/E3 frame
dsx3SendTestPattern
sending a test pattern."::={ dsx3ConfigEntry 7}
dsx3CircuitIdentifier OBJECT-TYPESYNTAXDisplayString(SIZE(0..255))ACCESSread-writeSTATUSmandatoryDESCRIPTION"This variable contains the transmission vendor's
circuit identifier, for the purpose of
facilitating troubleshooting."::={ dsx3ConfigEntry 8}dsx3LoopbackConfig OBJECT-TYPESYNTAXINTEGER{dsx3NoLoop(1),
dsx3PayloadLoop(2),dsx3LineLoop(3),dsx3OtherLoop(4)}ACCESSread-writeSTATUSmandatoryDESCRIPTION"This variable represents the loopback configuration
of the DS3/E3 interface.
The values mean:
dsx3NoLoop
Not in the loopback state. A device that is
not capable of performing a loopback on
the interface shall always return this as
it's value.
dsx3PayloadLoop
The received signal at this interface is looped
through the device.
Typically the received signal
is looped back for retransmission after it has
passed through the device's framing function.
dsx3LineLoop
The received signal at this interface does not
go through the device (minimum penetration) but
is looped back out.
dsx3OtherLoop
Loopbacks that are not defined here."::={ dsx3ConfigEntry 9}dsx3LineStatus OBJECT-TYPESYNTAXINTEGER(1..1023)ACCESSread-onlySTATUSmandatoryDESCRIPTION
"This variable indicates the
Line Status of the interface.
It contains loopback state information
and failure state information.
The dsx3LineStatus is a bit map represented
as a sum, therefore,
it can represent multiple failures
and a loopback (see dsx3LoopbackConfig object
for the type of loopback)
simultaneously.
The dsx3NoAlarm should be set if and only if
no other flag is set.
The various bit positions are:
1 dsx3NoAlarm No alarm present
2 dsx3RcvRAIFailure Receiving Yellow/Remote
Alarm Indication
4 dsx3XmitRAIAlarm Transmitting Yellow/Remote
Alarm Indication
8 dsx3RcvAIS Receiving AIS failure state
16 dsx3XmitAIS Transmitting AIS
32 dsx3LOF Receiving LOF failure state
64 dsx3LOS Receiving LOS failure state
128 dsx3LoopbackState Looping the received signal
256 dsx3RcvTestCode Receiving a Test Pattern
512 dsx3OtherFailure any line status not defined
here"::={ dsx3ConfigEntry 10}dsx3TransmitClockSource OBJECT-TYPESYNTAXINTEGER{loopTiming(1),localTiming(2),throughTiming(3)}ACCESSread-writeSTATUSmandatoryDESCRIPTION
"The source of Transmit Clock.
is derived from the recovered receive clock of
another DS3 interface."::={ dsx3ConfigEntry 11}-- the DS3/E3 Current-- The DS3/E3 current table contains various statistics being-- collected for the current 15 minute interval.dsx3CurrentTable OBJECT-TYPESYNTAXSEQUENCEOF Dsx3CurrentEntry
ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION"The DS3/E3 Current table."::={ ds3 6}dsx3CurrentEntry OBJECT-TYPE
SYNTAX Dsx3CurrentEntry
ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION"An entry in the DS3/E3 Current table."INDEX{ dsx3CurrentIndex }::={ dsx3CurrentTable 1}
Dsx3CurrentEntry ::=SEQUENCE{
dsx3CurrentIndex
INTEGER,
dsx3CurrentPESs
Gauge,
dsx3CurrentPSESs
Gauge,
dsx3CurrentSEFSs
Gauge,
dsx3CurrentUASs
Gauge,
dsx3CurrentLCVs
Gauge,
dsx3CurrentPCVs
Gauge,
dsx3CurrentLESs
Gauge,
dsx3CurrentCCVs
Gauge,
dsx3CurrentCESs
Gauge,
dsx3CurrentCSESs
Gauge}dsx3CurrentIndex OBJECT-TYPESYNTAXINTEGER(1..65535)ACCESSread-onlySTATUSmandatory
DESCRIPTION"The index value which uniquely identifies the
DS3/E3 interface to which this entry is
applicable. The interface identified by a
particular value of this index is the same
interface as identified by the same value an
dsx3LineIndex object instance."::={ dsx3CurrentEntry 1}dsx3CurrentPESs OBJECT-TYPESYNTAXGaugeACCESSread-onlySTATUSmandatoryDESCRIPTION"The counter associated with the number of P-bit
Errored Seconds, encountered by a DS3 interface in
the current 15 minute interval."::={ dsx3CurrentEntry 2}
dsx3CurrentPSESs OBJECT-TYPESYNTAXGaugeACCESSread-onlySTATUSmandatoryDESCRIPTION"The counter associated with the number of P-bit
Severely Errored Seconds, encountered by a DS3
interface in the current 15 minute interval."::={ dsx3CurrentEntry 3}dsx3CurrentSEFSs OBJECT-TYPESYNTAXGaugeACCESSread-onlySTATUSmandatoryDESCRIPTION"The counter associated with the number of
Severely Errored Framing Seconds, encountered by a
DS3/E3 interface in the current 15 minute
interval."::={ dsx3CurrentEntry 4}dsx3CurrentUASs OBJECT-TYPESYNTAXGaugeACCESSread-onlySTATUSmandatoryDESCRIPTION"The counter associated with the number of
Unavailable Seconds, encountered by a DS3
interface in the current 15 minute interval."::={ dsx3CurrentEntry 5}dsx3CurrentLCVs OBJECT-TYPESYNTAXGauge
ACCESSread-onlySTATUSmandatoryDESCRIPTION"The counter associated with the number of Line
Coding Violations encountered by a DS3/E3
interface in the current 15 minute interval."::={ dsx3CurrentEntry 6}dsx3CurrentPCVs OBJECT-TYPESYNTAXGaugeACCESSread-onlySTATUSmandatoryDESCRIPTION"The counter associated with the number of P-bit
Coding Violations, encountered by a DS3 interface
in the current 15 minute interval."::={ dsx3CurrentEntry 7}
dsx3CurrentLESs OBJECT-TYPESYNTAXGaugeACCESSread-onlySTATUSmandatoryDESCRIPTION"The number of Line Errored Seconds encountered by
a DS3/E3 interface in the current 15 minute
interval."::={ dsx3CurrentEntry 8}dsx3CurrentCCVs OBJECT-TYPESYNTAXGaugeACCESSread-onlySTATUSmandatoryDESCRIPTION"The number of C-bit Coding Violations encountered
by a DS3 interface in the current 15 minute
interval."::={ dsx3CurrentEntry 9}dsx3CurrentCESs OBJECT-TYPESYNTAXGaugeACCESSread-onlySTATUSmandatoryDESCRIPTION"The number of C-bit Errored Seconds encountered
by a DS3 interface in the current 15 minute
interval."::={ dsx3CurrentEntry 10}dsx3CurrentCSESs OBJECT-TYPESYNTAXGaugeACCESSread-onlySTATUSmandatory
DESCRIPTION"The number of C-bit Severely Errored Seconds
encountered by a DS3 interface in the current 15
minute interval."::={ dsx3CurrentEntry 11}-- the DS3/E3 Interval-- The DS3/E3 Interval Table contains various statistics-- collected by each DS3/E3 Interface over the previous 24-- hours of operation. The past 24 hours are broken into 96-- completed 15 minute intervals.dsx3IntervalTable OBJECT-TYPESYNTAXSEQUENCEOF Dsx3IntervalEntry
ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION
"The DS3/E3 Interval table."::={ ds3 7}dsx3IntervalEntry OBJECT-TYPESYNTAX Dsx3IntervalEntry
ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION"An entry in the DS3/E3 Interval table."INDEX{ dsx3IntervalIndex, dsx3IntervalNumber }::={ dsx3IntervalTable 1}
Dsx3IntervalEntry ::=SEQUENCE{
dsx3IntervalIndex
INTEGER,
dsx3IntervalNumber
INTEGER,
dsx3IntervalPESs
Gauge,
dsx3IntervalPSESs
Gauge,
dsx3IntervalSEFSs
Gauge,
dsx3IntervalUASs
Gauge,
dsx3IntervalLCVs
Gauge,
dsx3IntervalPCVs
Gauge,
dsx3IntervalLESs
Gauge,
dsx3IntervalCCVs
Gauge,
dsx3IntervalCESs
Gauge,
dsx3IntervalCSESs
Gauge}
dsx3IntervalIndex OBJECT-TYPESYNTAXINTEGER(1..65535)ACCESSread-onlySTATUSmandatoryDESCRIPTION"The index value which uniquely identifies the
DS3/E3 interface to which this entry is
applicable. The interface identified by a
particular value of this index is the same
interface as identified by the same value an
dsx3LineIndex object instance."::={ dsx3IntervalEntry 1}dsx3IntervalNumber OBJECT-TYPESYNTAXINTEGER(1..96)
ACCESSread-onlySTATUSmandatoryDESCRIPTION"A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is
the least recently completed 15 minutes interval
(assuming that all 96 intervals are valid)."::={ dsx3IntervalEntry 2}dsx3IntervalPESs OBJECT-TYPESYNTAXGaugeACCESSread-onlySTATUSmandatoryDESCRIPTION"The counter associated with the number of P-bit
Errored Seconds, encountered by a DS3 interface in
one of the previous 96, individual 15 minute,
intervals."::={ dsx3IntervalEntry 3}dsx3IntervalPSESs OBJECT-TYPESYNTAXGaugeACCESSread-onlySTATUSmandatoryDESCRIPTION"The counter associated with the number of P-bit
Severely Errored Seconds, encountered by a DS3
interface in one of the previous 96, individual 15
minute, intervals."::={ dsx3IntervalEntry 4}dsx3IntervalSEFSs OBJECT-TYPESYNTAXGauge
ACCESSread-onlySTATUSmandatoryDESCRIPTION"The counter associated with the number of
Severely Errored Framing Seconds, encountered by a
DS3/E3 interface in one of the previous 96,
individual 15 minute, intervals."::={ dsx3IntervalEntry 5}dsx3IntervalUASs OBJECT-TYPESYNTAXGaugeACCESSread-onlySTATUSmandatoryDESCRIPTION"The counter associated with the number of
Unavailable Seconds, encountered by a DS3
interface in one of the previous 96, individual 15
minute, intervals."::={ dsx3IntervalEntry 6}dsx3IntervalLCVs OBJECT-TYPESYNTAXGaugeACCESSread-onlySTATUSmandatoryDESCRIPTION"The counter associated with the number of Line
Coding Violations encountered by a DS3/E3
interface in one of the previous 96, individual 15
minute, intervals."::={ dsx3IntervalEntry 7}dsx3IntervalPCVs OBJECT-TYPESYNTAXGaugeACCESSread-only
STATUSmandatoryDESCRIPTION"The counter associated with the number of P-bit
Coding Violations, encountered by a DS3 interface
in one of the previous 96, individual 15 minute,
intervals."::={ dsx3IntervalEntry 8}dsx3IntervalLESs OBJECT-TYPESYNTAXGaugeACCESSread-onlySTATUSmandatoryDESCRIPTION"The number of Line Errored Seconds (BPVs or
illegal zero sequences) encountered by a DS3/E3
interface in one of the previous 96, individual
15 minute, intervals."::={ dsx3IntervalEntry 9}
dsx3IntervalCCVs OBJECT-TYPESYNTAXGaugeACCESSread-onlySTATUSmandatoryDESCRIPTION"The number of C-bit Coding Violations encountered
by a DS3 interface in one of the previous 96,
individual 15 minute, intervals."::={ dsx3IntervalEntry 10}dsx3IntervalCESs OBJECT-TYPESYNTAXGaugeACCESSread-onlySTATUSmandatoryDESCRIPTION"The number of C-bit Errored Seconds encountered
by a DS3 interface in one of the previous 96,
individual 15 minute, intervals."::={ dsx3IntervalEntry 11}dsx3IntervalCSESs OBJECT-TYPESYNTAXGaugeACCESSread-onlySTATUSmandatoryDESCRIPTION"The number of C-bit Severely Errored Seconds
encountered by a DS3 interface in one of the
previous 96, individual 15 minute, intervals."::={ dsx3IntervalEntry 12}-- the DS3/E3 Total-- The DS3/E3 Total Table contains the cumulative sum of the-- various statistics for the 24 hour period preceding the
-- current interval.dsx3TotalTable OBJECT-TYPESYNTAXSEQUENCEOF Dsx3TotalEntry
ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION"The DS3/E3 Total table. 24 hour interval."::={ ds3 8}dsx3TotalEntry OBJECT-TYPESYNTAX Dsx3TotalEntry
ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION"An entry in the DS3/E3 Total table."INDEX{ dsx3TotalIndex }
::={ dsx3TotalTable 1}
Dsx3TotalEntry ::=SEQUENCE{
dsx3TotalIndex
INTEGER,
dsx3TotalPESs
Gauge,
dsx3TotalPSESs
Gauge,
dsx3TotalSEFSs
Gauge,
dsx3TotalUASs
Gauge,
dsx3TotalLCVs
Gauge,
dsx3TotalPCVs
Gauge,
dsx3TotalLESs
Gauge,
dsx3TotalCCVs
Gauge,
dsx3TotalCESs
Gauge,
dsx3TotalCSESs
Gauge}dsx3TotalIndex OBJECT-TYPESYNTAXINTEGER(1..65535)ACCESSread-onlySTATUSmandatoryDESCRIPTION"The index value which uniquely identifies the
DS3/E3 interface to which this entry is
applicable. The interface identified by a
particular value of this index is the same
interface as identified by the same value an
dsx3LineIndex object instance."
::={ dsx3TotalEntry 1}dsx3TotalPESs OBJECT-TYPESYNTAXGaugeACCESSread-onlySTATUSmandatoryDESCRIPTION"The counter associated with the number of P-bit
Errored Seconds, encountered by a DS3 interface in
the previous 24 hour interval"::={ dsx3TotalEntry 2}dsx3TotalPSESs OBJECT-TYPESYNTAXGaugeACCESSread-onlySTATUSmandatoryDESCRIPTION
"The counter associated with the number of P-bit
Severely Errored Seconds, encountered by a DS3
interface in the previous 24 hour interval."::={ dsx3TotalEntry 3}dsx3TotalSEFSs OBJECT-TYPESYNTAXGaugeACCESSread-onlySTATUSmandatoryDESCRIPTION"The counter associated with the number of
Severely Errored Framing Seconds, encountered by a
DS3/E3 interface in the previous 24 hour
interval."::={ dsx3TotalEntry 4}dsx3TotalUASs OBJECT-TYPE
SYNTAXGaugeACCESSread-onlySTATUSmandatoryDESCRIPTION"The counter associated with the number of
Unavailable Seconds, encountered by a DS3
interface in the previous 24 hour interval."::={ dsx3TotalEntry 5}dsx3TotalLCVs OBJECT-TYPESYNTAXGaugeACCESSread-onlySTATUSmandatoryDESCRIPTION"The counter associated with the number of Line
Coding Violations encountered by a DS3/E3
interface in the previous 24 hour interval."
::={ dsx3TotalEntry 6}dsx3TotalPCVs OBJECT-TYPESYNTAXGaugeACCESSread-onlySTATUSmandatoryDESCRIPTION"The counter associated with the number of P-bit
Coding Violations, encountered by a DS3 interface
in the previous 24 hour interval."::={ dsx3TotalEntry 7}dsx3TotalLESs OBJECT-TYPESYNTAXGaugeACCESSread-onlySTATUSmandatoryDESCRIPTION
"The number of Line Errored Seconds (BPVs or
illegal zero sequences) encountered by a DS3/E3
interface in the previous 24 hour interval."::={ dsx3TotalEntry 8}dsx3TotalCCVs OBJECT-TYPESYNTAXGaugeACCESSread-onlySTATUSmandatoryDESCRIPTION"The number of C-bit Coding Violations encountered
by a DS3 interface in the previous 24 hour
interval."::={ dsx3TotalEntry 9}dsx3TotalCESs OBJECT-TYPESYNTAXGauge
ACCESSread-onlySTATUSmandatoryDESCRIPTION"The number of C-bit Errored Seconds encountered
by a DS3 interface in the previous 24 hour
interval."::={ dsx3TotalEntry 10}dsx3TotalCSESs OBJECT-TYPESYNTAXGaugeACCESSread-onlySTATUSmandatoryDESCRIPTION"The number of C-bit Severely Errored Seconds
encountered by a DS3 interface in the previous 24
hour interval."::={ dsx3TotalEntry 11}
-- The DS3 Far End Group-- Implementation of this group is optional for all systems-- that attach to a DS3 Interface.-- However, only C-bit Parity and SYNTRAN DS3 applications-- have the capability (option) of providing this information.-- The DS3 Far End Group consists of four tables:-- DS3 Far End Configuration-- DS3 Far End Current-- DS3 Far End Interval-- DS3 Far End Total-- The DS3 Far End Configuration Table contains-- configuration information-- reported in the C-bits from the remote end.dsx3FarEndConfigTable OBJECT-TYPESYNTAXSEQUENCEOF Dsx3FarEndConfigEntry
ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION"The DS3 Far End Configuration table."::={ ds3 9}dsx3FarEndConfigEntry OBJECT-TYPESYNTAX Dsx3FarEndConfigEntry
ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION"An entry in the DS3 Far End Configuration table."INDEX{ dsx3FarEndLineIndex }::={ dsx3FarEndConfigTable 1}
Dsx3FarEndConfigEntry ::=SEQUENCE{
dsx3FarEndLineIndex
INTEGER,
dsx3FarEndEquipCode
DisplayString,
dsx3FarEndLocationIDCode
DisplayString,
dsx3FarEndFrameIDCode
DisplayString,
dsx3FarEndUnitCode
DisplayString,
dsx3FarEndFacilityIDCode
DisplayString}dsx3FarEndLineIndex OBJECT-TYPESYNTAXINTEGER(1..65535)ACCESSread-onlySTATUSmandatory
DESCRIPTION"The index value which uniquely identifies the
DS3 interface
to which this entry is applicable. The
interface identified by a particular value of
this index is the same interface as identified
by the same value an dsx3LineIndex object
instance."::={ dsx3FarEndConfigEntry 1}dsx3FarEndEquipCode OBJECT-TYPESYNTAXDisplayString(SIZE(0..10))ACCESSread-writeSTATUSmandatoryDESCRIPTION"This is the Far End Equipment Identification code
that describes the specific piece of equipment.
It is sent within the Path
Identification Message."::={ dsx3FarEndConfigEntry 2}dsx3FarEndLocationIDCode OBJECT-TYPESYNTAXDisplayString(SIZE(0..11))ACCESSread-writeSTATUSmandatoryDESCRIPTION"This is the Far End Location Identification code
that describes the specific location of the
equipment.
It is sent within the Path
Identification Message."
::={ dsx3FarEndConfigEntry 3}dsx3FarEndFrameIDCode OBJECT-TYPESYNTAXDisplayString(SIZE(0..10))ACCESSread-writeSTATUSmandatoryDESCRIPTION"This is the Far End Frame Identification code
that identifies where the equipment is located
within a building at a given location.
It is sent within the Path
Identification Message."::={ dsx3FarEndConfigEntry 4}dsx3FarEndUnitCode OBJECT-TYPE
SYNTAXDisplayString(SIZE(0..6))ACCESSread-writeSTATUSmandatoryDESCRIPTION"This is the Far End code
that identifies the equipment location within a bay.
It is sent within the Path
Identification Message."::={ dsx3FarEndConfigEntry 5}dsx3FarEndFacilityIDCode OBJECT-TYPESYNTAXDisplayString(SIZE(0..38))
ACCESSread-writeSTATUSmandatoryDESCRIPTION"This code identifies a specific Far End DS3 path.
It is sent within the Path
Identification Message."::={ dsx3FarEndConfigEntry 6}-- The DS3 Far End Current-- The DS3 Far End Current table contains various statistics-- being collected for the current 15 minute interval.-- The statistics are collected from the far end block error-- code within the C-bits.dsx3FarEndCurrentTable OBJECT-TYPESYNTAXSEQUENCEOF Dsx3FarEndCurrentEntry
ACCESSnot-accessible
STATUSmandatoryDESCRIPTION"The DS3 Far End Current table."::={ ds3 10}dsx3FarEndCurrentEntry OBJECT-TYPESYNTAX Dsx3FarEndCurrentEntry
ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION"An entry in the DS3 Far End Current table."INDEX{ dsx3FarEndCurrentIndex }::={ dsx3FarEndCurrentTable 1}
Dsx3FarEndCurrentEntry ::=SEQUENCE{
dsx3FarEndCurrentIndex
INTEGER,
dsx3FarEndTimeElapsed
INTEGER,
dsx3FarEndValidIntervals
INTEGER,
dsx3FarEndCurrentCESs
Gauge,
dsx3FarEndCurrentCSESs
Gauge,
dsx3FarEndCurrentCCVs
Gauge,
dsx3FarEndCurrentUASs
Gauge}dsx3FarEndCurrentIndex OBJECT-TYPESYNTAXINTEGER(1..65535)ACCESSread-only
STATUSmandatoryDESCRIPTION"The index value which uniquely identifies the
DS3 interface
to which this entry is applicable. The interface
identified by a particular value of this index is
the same interface as identified by the same value
an dsx3LineIndex object instance."::={ dsx3FarEndCurrentEntry 1}dsx3FarEndTimeElapsed OBJECT-TYPESYNTAXINTEGER(0..899)ACCESSread-onlySTATUSmandatoryDESCRIPTION
"The number of seconds that have elapsed since the
beginning of the far end current error-measurement
period."::={ dsx3FarEndCurrentEntry 2}dsx3FarEndValidIntervals OBJECT-TYPESYNTAXINTEGER(0..96)ACCESSread-onlySTATUSmandatoryDESCRIPTION"The number of previous far end intervals for
which valid data was collected. The value will be
96 unless the interface was brought online within
the last 24 hours, in which case the value will be
the number of complete 15 minute far end intervals
since the interface has been online."::={ dsx3FarEndCurrentEntry 3}dsx3FarEndCurrentCESs OBJECT-TYPESYNTAXGaugeACCESSread-onlySTATUSmandatoryDESCRIPTION"The counter associated with the number of Far
Far End C-bit Errored Seconds encountered by a DS3
interface in the current 15 minute interval."::={ dsx3FarEndCurrentEntry 4}dsx3FarEndCurrentCSESs OBJECT-TYPESYNTAXGaugeACCESSread-only
STATUSmandatoryDESCRIPTION"The counter associated with the number of
Far End C-bit Severely Errored Seconds
encountered by a DS3 interface in the current 15
minute interval."::={ dsx3FarEndCurrentEntry 5}dsx3FarEndCurrentCCVs OBJECT-TYPESYNTAXGaugeACCESSread-onlySTATUSmandatoryDESCRIPTION"The counter associated with the number of
Far End C-bit Coding Violations reported via
the far end block error count
encountered by a
DS3 interface in the current 15 minute interval."
::={ dsx3FarEndCurrentEntry 6}dsx3FarEndCurrentUASs OBJECT-TYPESYNTAXGaugeACCESSread-onlySTATUSmandatoryDESCRIPTION"The counter associated with the number of
Far End unavailable seconds
encountered by a
DS3 interface in the current 15 minute interval."::={ dsx3FarEndCurrentEntry 7}-- The DS3 Far End Interval-- The DS3 Far End Interval Table contains various statistics-- collected by each DS3 interface over the previous 24-- hours of operation. The past 24 hours are broken into 96
-- completed 15 minute intervals.dsx3FarEndIntervalTable OBJECT-TYPESYNTAXSEQUENCEOF Dsx3FarEndIntervalEntry
ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION"The DS3 Far End Interval table."::={ ds3 11}dsx3FarEndIntervalEntry OBJECT-TYPESYNTAX Dsx3FarEndIntervalEntry
ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION"An entry in the DS3 Far
End Interval table."
INDEX{ dsx3FarEndIntervalIndex,
dsx3FarEndIntervalNumber }::={ dsx3FarEndIntervalTable 1}
Dsx3FarEndIntervalEntry ::=SEQUENCE{
dsx3FarEndIntervalIndex
INTEGER,
dsx3FarEndIntervalNumber
INTEGER,
dsx3FarEndIntervalCESs
Gauge,
dsx3FarEndIntervalCSESs
Gauge,
dsx3FarEndIntervalCCVs
Gauge,
dsx3FarEndIntervalUASs
Gauge
}dsx3FarEndIntervalIndex OBJECT-TYPESYNTAXINTEGER(1..65535)ACCESSread-onlySTATUSmandatoryDESCRIPTION"The index value which uniquely identifies the
DS3 interface
to which this entry is applicable. The
interface identified by a particular value of
this index is the same interface as identified
by the same value an dsx3LineIndex object
instance."::={ dsx3FarEndIntervalEntry 1}dsx3FarEndIntervalNumber OBJECT-TYPESYNTAXINTEGER(1..96)
ACCESSread-onlySTATUSmandatoryDESCRIPTION"A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is
the least recently completed 15 minutes
interval (assuming that all 96 intervals are
valid)."::={ dsx3FarEndIntervalEntry 2}dsx3FarEndIntervalCESs OBJECT-TYPESYNTAXGaugeACCESSread-onlySTATUSmandatoryDESCRIPTION
"The counter associated with the number of
Far End C-bit Errored Seconds encountered
by a DS3 interface in one of the previous 96,
individual 15 minute, intervals."::={ dsx3FarEndIntervalEntry 3}dsx3FarEndIntervalCSESs OBJECT-TYPESYNTAXGaugeACCESSread-onlySTATUSmandatoryDESCRIPTION"The counter associated with the number of
Far End C-bit Severely Errored Seconds
encountered by a DS3 interface in one of the
previous 96, individual 15 minute, intervals."::={ dsx3FarEndIntervalEntry 4}
dsx3FarEndIntervalCCVs OBJECT-TYPESYNTAXGaugeACCESSread-onlySTATUSmandatoryDESCRIPTION"The counter associated with the number of
Far End C-bit Coding Violations reported via
the far end block error count
encountered by a
DS3 interface in one of the previous 96,
individual 15 minute, intervals."::={ dsx3FarEndIntervalEntry 5}dsx3FarEndIntervalUASs OBJECT-TYPESYNTAXGaugeACCESSread-onlySTATUSmandatory
DESCRIPTION"The counter associated with the number of
Far End unavailable seconds
encountered by a
DS3 interface in one of the previous 96,
individual 15 minute, intervals."::={ dsx3FarEndIntervalEntry 6}-- The DS3 Far End Total-- The DS3 Far End Total Table contains the cumulative sum-- of the various statistics for the 24 hour period preceding-- the current interval.dsx3FarEndTotalTable OBJECT-TYPESYNTAXSEQUENCEOF Dsx3FarEndTotalEntry
ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION
"The DS3 Far End Total table. 24 hour interval."::={ ds3 12}dsx3FarEndTotalEntry OBJECT-TYPESYNTAX Dsx3FarEndTotalEntry
ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION"An entry in the DS3 Far End Total table."INDEX{ dsx3FarEndTotalIndex }::={ dsx3FarEndTotalTable 1}
Dsx3FarEndTotalEntry ::=SEQUENCE{
dsx3FarEndTotalIndex
INTEGER,
dsx3FarEndTotalCESs
Gauge,
dsx3FarEndTotalCSESs
Gauge,
dsx3FarEndTotalCCVs
Gauge,
dsx3FarEndTotalUASs
Gauge}dsx3FarEndTotalIndex OBJECT-TYPESYNTAXINTEGER(1..65535)ACCESSread-onlySTATUSmandatoryDESCRIPTION"The index value which uniquely identifies the
DS3 interface
to which this entry is applicable. The interface
identified by a particular value of this index is
the same interface as identified by the same value
an dsx3LineIndex object instance."::={ dsx3FarEndTotalEntry 1}dsx3FarEndTotalCESs OBJECT-TYPESYNTAXGaugeACCESSread-onlySTATUSmandatoryDESCRIPTION"The counter associated with the number of Far
End C-bit Errored Seconds encountered by a DS3
interface in the previous 24 hour interval."::={ dsx3FarEndTotalEntry 2}dsx3FarEndTotalCSESs OBJECT-TYPESYNTAXGauge
ACCESSread-onlySTATUSmandatoryDESCRIPTION"The counter associated with the number of
Far End C-bit Severely Errored Seconds
encountered by a DS3 interface in the previous 24
hour interval."::={ dsx3FarEndTotalEntry 3}dsx3FarEndTotalCCVs OBJECT-TYPESYNTAXGaugeACCESSread-onlySTATUSmandatoryDESCRIPTION"The counter associated with the number of
Far End C-bit Coding Violations reported via the
far end block error count
encountered by a
DS3 interface in the previous 24 hour interval."::={ dsx3FarEndTotalEntry 4}dsx3FarEndTotalUASs OBJECT-TYPESYNTAXGaugeACCESSread-onlySTATUSmandatoryDESCRIPTION"The counter associated with the number of
Far End unavailable seconds
encountered by a
DS3 interface in the previous 24 hour interval."::={ dsx3FarEndTotalEntry 5}-- the DS3/E3 Fractional Group-- Implementation of this group is optional. It is designed-- for those systems dividing a DS3/E3 into channels
-- containing different data streams that are of local-- interest.-- The DS3/E3 fractional table identifies which DS3/E3-- channels associated with a CSU are being used to-- support a logical interface, i.e., an entry in the-- interfaces table from the Internet-standard MIB.-- For example, consider a DS3 device with 4 high speed links-- carrying router traffic, a feed for voice, a feed for-- video, and a synchronous channel for a non-routed-- protocol.-- We might describe the allocation of channels, in the-- dsx3FracTable, as follows:-- dsx3FracIfIndex.2. 1 = 3 dsx3FracIfIndex.2.15 = 4-- dsx3FracIfIndex.2. 2 = 3 dsx3FracIfIndex.2.16 = 6-- dsx3FracIfIndex.2. 3 = 3 dsx3FracIfIndex.2.17 = 6
-- dsx3FracIfIndex.2. 4 = 3 dsx3FracIfIndex.2.18 = 6-- dsx3FracIfIndex.2. 5 = 3 dsx3FracIfIndex.2.19 = 6-- dsx3FracIfIndex.2. 6 = 3 dsx3FracIfIndex.2.20 = 6-- dsx3FracIfIndex.2. 7 = 4 dsx3FracIfIndex.2.21 = 6-- dsx3FracIfIndex.2. 8 = 4 dsx3FracIfIndex.2.22 = 6-- dsx3FracIfIndex.2. 9 = 4 dsx3FracIfIndex.2.23 = 6-- dsx3FracIfIndex.2.10 = 4 dsx3FracIfIndex.2.24 = 6-- dsx3FracIfIndex.2.11 = 4 dsx3FracIfIndex.2.25 = 6-- dsx3FracIfIndex.2.12 = 5 dsx3FracIfIndex.2.26 = 6-- dsx3FracIfIndex.2.13 = 5 dsx3FracIfIndex.2.27 = 6-- dsx3FracIfIndex.2.14 = 5 dsx3FracIfIndex.2.28 = 6-- For dsx3M23, dsx3SYNTRAN, dsx3CbitParity, and-- dsx3ClearChannel there are 28 legal channels, numbered 1
-- through 28.-- For e3Framed there are 16 legal channels,-- numbered 1 through 16. The channels (1..16) correspond-- directly to the equivalently numbered time-slots.dsx3FracTable OBJECT-TYPESYNTAXSEQUENCEOF Dsx3FracEntry
ACCESSnot-accessibleSTATUSmandatoryDESCRIPTION"The DS3 Fractional table."::={ ds3 13}dsx3FracEntry OBJECT-TYPESYNTAX Dsx3FracEntry
ACCESSnot-accessibleSTATUSmandatory
DESCRIPTION"An entry in the DS3 Fractional table."INDEX{ dsx3FracIndex, dsx3FracNumber }::={ dsx3FracTable 1}
Dsx3FracEntry ::=SEQUENCE{
dsx3FracIndex
INTEGER,
dsx3FracNumber
INTEGER,
dsx3FracIfIndex
INTEGER}dsx3FracIndex OBJECT-TYPESYNTAXINTEGER(1..'7fffffff'h)
ACCESSread-onlySTATUSmandatoryDESCRIPTION"The index value which uniquely identifies the
DS3 interface to which this entry is applicable
The interface identified by a particular
value of this index is the same interface as
identified by the same value an dsx3LineIndex
object instance."::={ dsx3FracEntry 1}dsx3FracNumber OBJECT-TYPESYNTAXINTEGER(1..31)ACCESSread-onlySTATUSmandatoryDESCRIPTION
"The channel number for this entry."::={ dsx3FracEntry 2}dsx3FracIfIndex OBJECT-TYPESYNTAXINTEGER(1..'7fffffff'h)ACCESSread-writeSTATUSmandatoryDESCRIPTION"An index value that uniquely identifies an
interface. The interface identified by a particular
value of this index is the same interface
as identified by the same value an ifIndex
object instance. If no interface is currently using
a channel, the value should be zero. If a
single interface occupies more than one time
slot, that ifIndex value will be found in multiple
time slots."::={ dsx3FracEntry 3}END